No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


The command is used to collect internal logs of disks.

Format -h -d [SDID] -r






Collects the internal logs of a disk based on its SDID.

To obtain the value, run " showdisk".


Clears the collected internal logs.



The usage of script.



Minisystem mode

Usage Guidelines

This command is executed to collect internal logs of disks. Use it under the guidance of technical engineers.


Collect internal logs of a disk.

Storage: minisystem> -d 65 
You are about to collect internal logs of a specified disk. The collection takes about 30 minutes. During the collection, services in the disk domain where the disk resides are affected. Suspend the service or perform this operation during off-peak hours. If you run the log collection command, it means that you know risks of running the command. 
Have you read danger alert messages carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
We are collecting the internal logs, please wait ...100% 
The internal logs are collected successfully. The log package path is /home/permitdir/internal_disklog. Export the log package and run the -r command to clear the internal logs.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 622411

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next