Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rm showwaitotherctrltaskinfo
Function
The rm showwaitotherctrltaskinfo command is used to query the tasks on the local controller waiting to be returned by the other controllers in the disk array.
Format
rm showwaitotherctrltaskinfo
Parameters
None
Views
Diagnostic view
Usage Guidelines
None
Example
To check the information of the tasks on the local controller waiting to be returned by the other controllers in the disk array, run the following command.
admin:/diagnose>rm showwaitotherctrltaskinfo
waitNodeId SerialNo TaskCode CmdCode
---------- -------- -------- -------
pair Id cgid intendNode
---------------- ---------------- ----------
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
waitNodeId |
Node from which tasks must be returned. |
SerialNo |
Task serial number. |
TaskCode |
Task code. |
CmdCode |
Command code being processed in tasks. |
pair Id |
Remote replication ID. |
cgid |
Consistency group ID. |
intendNode |
WWN of the end that initiated tasks. |
Previous
