No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show tgt_switch vxvm_dmp_feature

show tgt_switch vxvm_dmp_feature

Function

The show tgt_switch vxvm_dmp_feature command is used to query the switch for allowing hosts to use Veritas Volume Manager (VxVM) DMP in HyperMetro scenarios.

Format

show tgt_switch vxvm_dmp_feature

Parameters

None

Views

Developer view

Usage Guidelines

None

Example

Query the switch for allowing hosts to use VxVM DMP in HyperMetro scenarios.

developer:/>show tgt_switch vxvm_dmp_feature
Switch Type: VxVM DMP FEATURE
Switch Status: Off

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Switch Type

Switch type.

The value is "VxVM DMP".

Switch Status

Switch status. The value can be "On" or "Off".

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 758592

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next