No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show storage_pool general

show storage_pool general


The show storage_pool general command is used to query information about storage pools.


show storage_pool general [ pool_id=? ]






ID of a storage pool.

To obtain the value, run "show storage_pool general" without parameters.


Developer view, vstore developer view

Usage Guidelines

  • Run "show storage_pool general" to query basic information about all storage pools.
  • Run "show storage_pool general pool_id=?" to query detailed information about a specified storage pool.


Query detailed information about storage pool "0" in developer mode.

developer:/>show storage_pool general pool_id=0 
ID : 0 
Name : StoragePool001 
Disk Domain ID : 0 
Health Status : Normal 
Running Status : Online 
Total Capacity : 1.000TB 
Subscribed Capacity : 100.187GB 
Free Capacity : 923.812GB 
Protection Capacity : 0.000B 
Tier0 Capacity : 0.000B 
Tier1 Capacity : 0.000B 
Tier2 Capacity : 1.000TB 
Full Threshold(%) : 80 
Extent Size : 4.000MB 
SmartTier Feature Status : Inactive 
Relocation Status : Ready 
Relocation Trigger Mode : Manual 
Relocation Paused : No 
Estimated Move-up Data : 0.000B 
Estimated Move-down Data : 0.000B 
Estimated Data Relocation Duration : 0 hour(s),0 minute(s),0 second(s) 
Usage Type : LUN 
Full Protect Threshold(%) : 50  
LUN Total Capacity : 0.000B 
File System Total Capacity : 0.000B 
Dedup Saved Capacity : 0.000B 
Dedup Saved Ratio(%) : 0 
Compression Saved Capacity : 0.000B 
Compression Saved Ratio(%) : 0  
Total Saved Capacity : 0.000B  
Total Saved Ratio(%) : 0 
Description : -- 
Used Percentage(%) : 9.78 
Auto Deactivate Snapshot Switch : Yes 
Protect Allocate Ratio(%) : 10 
Protect Fixed Reserve : 10GB 
Protect Reserve Threshold : 20GB 
Protect Actual Reserve : 5GB

System Response

The following table describes the parameter meanings.




Storage pool ID.


Storage pool name.

Disk Domain ID

Disk domain ID.

Health Status

Health status.

Running Status

Running status.

Total Capacity

Total capacity of the storage pool.

Subscribed Capacity

Capacity allocated to LUNs.

Free Capacity

Free capacity of the storage pool.

Protection Capacity

Data protection capacity quota.

Tier0 Capacity

Capacity of the SSD tier of a storage pool.

Tier1 Capacity

Capacity of the SAS tier of a storage pool.

Tier2 Capacity

Capacity of the NL-SAS tier of a storage pool.

Full Threshold(%)

Capacity alarm threshold.

SmartTier Feature Status

SmartTier status.

Extent Size

Data relocation granularity.

Relocation Status

Data relocation status.

Relocation Trigger Mode

Relocation triggering mode.

Relocation Paused

Whether SmartTier is suspended.

Estimated Move-up Data

Amount of data that can be moved up.

Estimated Move-down Data

Amount of data that can be moved down.

Estimated Data Relocation Duration

Estimated data migration duration.

Usage Type

Storage pool use.

Full Protect Threshold(%)

Protection capacity alarm threshold.

LUN Total Capacity

Sum of the LUN capacity specified during LUN creation and capacity of activated snapshots of all LUNs.

File System Total Capacity

Sum of file system capacities specified during file system creation in the storage pool.

Dedup Saved Capacity

Saved storage pool capacity when deduplication is enabled.

Dedup Saved Ratio(%)

Percentage of saved storage pool capacity by deduplication to used system capacity.

Compression Saved Capacity

Saved storage pool capacity when compression is enabled.

Compression Saved Ratio(%)

Percentage of saved storage pool capacity by compression to used system capacity.

Total Saved Capacity

Totally saved storage pool capacity when deduplication and compression are enabled.

Total Saved Ratio(%)

Percentage of totally saved storage pool capacity by deduplication and compression to used system capacity.


Storage pool description.

Used Percentage

Used capacity percentage of a storage pool.

Auto Deactivate Snapshot Switch

Whether to automatically deactivate snapshots that are not mapped to hosts when the storage pool is used up.

Protect Allocate Ratio

Pre-allocation ratio of data protection capacity.

Protect Fixed Reserve

Fixed capacity reserved for data protection.

Protect Reserve Threshold

Maximum capacity reserved for data protection.

Protect Actual Reserve

Actual capacity reserved for data protection.

Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 632266

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next