No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliset -d rebootsystem

cliset -d rebootsystem


The cliset -d rebootsystem command is used to reset the controller x86 system through the CPLD on the BMC serial port.


cliset -d rebootsystem -v parameter1






x86 system reset mode.

The value can be "0" or "1", where:

  • "0": warm reset.
  • "1": hard reset.


serial port mode

Usage Guidelines

  • Running the "cliset -d rebootsystem -v 0" command to reset the x86 system in warm reset mode.
  • Running the "cliset -d rebootsystem -v 1" command to reset the x86 system in hard reset mode.


Run the "cliset -d rebootsystem -v 0" command on the BMC serial port interface of the controller to reset the x86 system in warm reset mode.

administrator@CTRL_A / $ :cliset -d rebootsystem -v 0                                                                                 
DANGER: You are about to restart storage system. This may take several minutes.                                                      
This operation will interrupt all services on the storage system.                                                                    
Suggestion: Before performing this operation, stop all services on the system.                                                    
Have you read danger alert message carefully?(y/n):y                                                                                 
Are you sure you really want to perform the operation?(y/n):y                                                                        
Input your password:**********                                                                                                       
Soft Reboot System successfully!  

System Response


Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 626448

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next