No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -d bbuinformation

cliget -d bbuinformation

Function

The cliget -d bbuinformation command is used to view backup battery unit (BBU) information.

Format

cliget -d bbuinformation

Parameters

None

Modes

serial port mode

Usage Guidelines

This command can be used only to query information about available BBUs.

OceanStor 18500 V5 Kunpeng, 18500F V5 Kunpeng, 18800 V5 Kunpeng and 18800F V5 Kunpeng storage systems support this command.

Example

View BBU information. The command output varies depending on a specific product.

iBMC:/->cliget -d bbuinformation
----------------  I2C state    ----------------
I2cState        : 0x0 
State(CPLD)     : 0x2 
---------------- RealTimeuInfo ----------------
WorkStatus      : 0x10 Offline 
BoardTemp1      : 32.000 
BoardTemp2      : 32.250 
BusBarTemp      : 0.000 
BuckTemp1       : -256.000 
BuckTemp2       : -256.000 
ChargeCur       : 0.000 
DischargeCur    : 0.000 
BattCur         : 0.000 
Reserve1        : 0.000 
Reserve2        : 0.000 
12V_BusVolt     : 12.234 
DischargeVolt   : 0.223 
ChargeVolt      : 0.246 
BattVolt        : 0.000 
Hdd5vVolt       : 0.000 
Core1Volt       : 0.000 
Core2Volt       : 0.000 
Core3Volt       : 0.000 
Core4Volt       : 0.000 
Core5Volt       : 0.000 
Core6Volt       : 0.000 
Fault           : 0x00000000 
InstantPower    : 0(W)
SteadyCap       : 0(10mWh)
FullChgCap      : 0(10mWh)
RemainCap       : 0(10mWh)
RSOC            : 0(%)
SOH             : 0(%)
----------------    FuncInfo   ----------------
FuncGet         : 0x0 0x0 
---------------- StaticAttrInfo ---------------
ModuleType      : Entry
PcbVersion      : A 
SoftVersion     : 60.00.12T16 
ModuleSN        :  
BattVendorName  :  
BattProductName :  
BattProductDate : 2236-0-0 
BattSN          :  
----------------   ParaInfo    ----------------
RtcTimeGet      : 2019-06-24 15:45:32 
WorkTime        : 849(h) 
BbuCycleCount   : 2
BattCycleCount  : 0
LastLearningTime: 2000-00-00 00:00:00 
DsgBeginTime   : 2019-04-18 14:31:07
DsgContinuedTime: 77(s)
DsgTotalEnergy  : 202(10mWh)
DsgAvgCurr      : 7.750(A)
DsgStopVolt     : 15.521(V)
---------------- EquipmentInfo ----------------
EquipModeGet    : 0x0 
GpioStatus      : 0x0 0x80 
----------------    TestInfo   ----------------
TestModeGet     : 0x0

System Response

None.

Parameter

Meaning

I2cState

I2C status.

State(CPLD)

BBU status.

WorkState

Working status.

BoardTemp1

Board temperature 1.

BoardTemp2

Board temperature 2.

BusBarTemp

Copper bar temperature.

BuckTemp1

Battery pack temperature 1.

BuckTemp2

Battery pack temperature 2.

ChargeCur

Charging current.

DisChargeCur

Discharge current.

BattCur

Battery pack current.

Reserve1

Reserved field 1.

Reserve2

Reserved field 2.

12V_BusVolt

Bus voltage.

DisChargeVol

Discharge voltage.

ChargeVol

Charging voltage.

BattVolt

Battery voltage.

Hdd5vVolt

5 V power supply voltage of disks.

Core1Volt

Voltage of electrochemical cell 1.

Core2Volt

Voltage of electrochemical cell 2.

Core3Volt

Voltage of electrochemical cell 3.

Core4Volt

Voltage of electrochemical cell 4.

Core5Volt

Voltage of electrochemical cell 5.

Core6Volt

Voltage of electrochemical cell 6.

Fault

Fault alarm code.

InstantPower

Transient power capability.

SteadCap

Steady-state energy capability.

FullChgCap

Full charge capacity.

RemainCap

Remaining capacity.

RSOC

Percentage of the remaining capacity.

SOH

Health status percentage.

FuncGet

Queries the function status.

ModuleType

Module type.

PcbVersion

PCB version.

SoftVersion

Software version number.

ModuleSN

Module serial number.

BattVendorName

Battery vendor name.

BattProductName

Battery manufacturer name.

BattProductDate

Battery production date.

BattSN

Battery serial number.

RtcTimeGet

Time.

WorkTime

Working duration.

BbuCycleCount

Number of charging and discharging times of the module.

BattCycleCount

Number of battery pack charging and discharging times.

LastLearningTime

Time when the last online test is successful.

DsgBeginTime

Last discharge time.

DsgContinuedTime

Last discharge duration.

DsgTotalEnergy

Last discharge current.

DsgAvgCurr

Average current of the last discharge.

DsgStopVolt

Voltage when the last discharge stops.

EquipModeGet

Equipment mode.

GpioStatus

GPIO status.

TestModeGet

Test mode.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 761089

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next