No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -f printbios

cliget -f printbios

Function

The cliget -f printbios command is used to view BIOS boot information after the system is reset.

Format

cliget -f printbios

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Viewing BIOS boot information.

administrator@CTRL_B / $ cliget -f printbios 
sys start end 
Time:1970-1-1 0:5:23 
Loading PEIM at 0xFFF317FC EntryPoint=0xFFF32024 
Register PPI Notify: 7E1F0D85-04FF-4BB2-866A-31A2996A48A8 
Loading PEIM at 0xFFF32D24 EntryPoint=0xFFF32F95 
PCI PreInit Module PciPreInitPeim() Run! 
Pci Command Register 04: 7 
LPC IoBase(0x0210) 
LPC_GEN_DEC4 Register 0x8C: 0x 0 
Current Bios Channel is 0x0 
Power on CPLD Status: 
ADDR 0x 0: 1 55 60 12 90 0 0 0 39 0 3 FF 1 0 0 21 
ADDR 0x 10: 0 0 0 2 0 0 0 0 A 0 0 0 0 0 0 0 
ADDR 0x 20: 1 0 5 0 0 0 0 0 0 0 0 0 0 0 0 0 
ADDR 0x 30: A 0 0 FF FF 1 0 0 0 0 0 0 0 0 0 0 
ADDR 0x 40: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 
ADDR 0x 50: 0 0 0 3 0 0 0 0 0 0 0 F 0 0 0 0 
Loading PEIM at 0xFFF335B4 EntryPoint=0xFFF33867 
2000OemBiosInfo is : 
[BiosCrcCheckPei]: Vendor= Huawei 
[BiosCrcCheckPei]: BiosName= Pangea_BIOS 
[BiosCrcCheckPei]: ProductVersion= 10.01.03T06.ME02.01.07.129 
[BiosCrcCheckPei]: UniBiosVersion= V100R015C20B018 
[BiosCrcCheckPei]: BIOSCRCSum= 58E2CAB1 
[BiosCrcCheckPei]: Build Time is 2014-5-5 0:10:58 
[BiosCrcCheckPei]: FVCRCSum1 CRC is [A3CF2151] 
[BiosCrcCheckPei]: FVCRCSum2 CRC is [2A2F92A9] 
[BiosCrcCheckPei]: FVCRCSum3 CRC is [3E309FDA] 
[BiosCrcCheckPei]: ALL FV CRC CRC is [58E2CAB1] 
[SELF_TEST]:Bios CRC Check Success!

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 622930

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next