No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change interface_module_flag resume_backup_flag

change interface_module_flag resume_backup_flag

Function

The change interface_module_flag resume_backup_flag command is used to restore the spare part flag of an interface module.

Format

change interface_module_flag resume_backup_flag interface_module_id=?

Parameters

Parameter

Description

Value

interface_module_id=? ID of an interface module.

To obtain the value, run "show interface_module" without parameters.

Views

Developer view

Usage Guidelines

  • Before performing this operation, ensure that the services of all ports on the interface module are stopped.
  • After performing this operation, remove the interface module with a spare part flag and insert it into the correct slot.

Example

Restore the spare part flag of interface module "CTE0.A.IOM5".

developer:/>change interface_module_flag resume_backup_flag interface_module_id=CTE0.A.IOM5
DANGER: You are about to resume the backup flag of the interface module.
This operation may cause that the services of all ports on the interface module are interrupted.
Suggestion:
1. Before you perform this operation, ensure that the services of all ports on the interface module are stopped.
2. After performing this operation, remove the interface module with backup flag and insert it into correct slot.
Have you read danger alert message carefully?(y/n)y
 
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 763229

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next