No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
setpwronpausestage.sh

setpwronpausestage.sh

Function

The setpwronpausestage.sh command is used to suspend or resume a phase during the power-on process of a storage system.

Format

setpwronpausestage.sh [pausethirdinsmod | resumethirdinsmod | pausenodepoweron | resumenodepoweron | pauseobjpoweron | resumeobjpoweron]

Parameters

Parameter

Description

Value

pausethirdinsmod Suspends module loading. This parameter takes effect only after the storage system restarts.

-

resumethirdinsmod Resumes module loading.

-

pausenodepoweron Suspends the adding of a specified controller into a cluster. If the controller has been added into a cluster, the storage system must be restarted for the parameter to take effect.

-

resumenodepoweron Resumes the adding of a specified controller into a cluster.

-

pauseobjpoweron Suspends object power-on. This command must be executed on the master controller. If this object has been powered on, the storage system must be restarted for the parameter to take effect.If the ID of the master controller is different from that before the restart, you must execute this command on the new master controller for the configuration to take effect.

-

resumeobjpoweron Resumes object power-on.

-

Modes

Minisystem mode

Usage Guidelines

The suspension or resuming operation is performed for different objects based on the parameter you set. If you run "setpwronpausestage.sh pausenodepoweron", the adding of a specified controller into a clusterthe will be suspended. If you run "setpwronpausestage.sh resumenodepoweron", the adding of a specified controller into a cluster will be resumed. If the controller has been powered on, you must restart the storage system for the command to take effect.

Example

  • Suspend module loading.

    Storage: minisystem> setpwronpausestage.sh pausethirdinsmod
    Please reboot the system to take effect.
  • Resume module loading.

    Storage: minisystem> setpwronpausestage.sh resumethirdinsmod
  • Suspend the adding of a specified controller into a cluster.

    Storage: minisystem> setpwronpausestage.sh pausenodepoweron
    If the system power-on has gone through this phase, you must restart the storage system to enable the command to take effect.
  • Resume the adding of a specified controller into a cluster.

    Storage: minisystem> setpwronpausestage.sh resumenodepoweron
  • Suspend object power-on.

    Storage: minisystem> setpwronpausestage.sh pauseobjpoweron
    If the system power-on has gone through this phase, you must restart the storage system to enable the command to take effect.
  • Resume object power-on.

    Storage: minisystem> setpwronpausestage.sh resumeobjpoweron 

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 763757

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next