No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete remote_replication_dcl

delete remote_replication_dcl


The delete remote_replication_dcl command is used to forcibly delete the remote replication DCL of a specified LUN.


delete remote_replication_dcl lun_id=? dcl_id=?





lun_id=? Indicates the ID of a LUN.

To obtain the value, run "show lun general".

dcl_id=? Indicates the ID of a DCL.

To obtain the value, run "dcl showdclid".


Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can only be used when you need to delete the DCL and you cannot delete the remote replication with incorrect DB information. Do not use this command in other scenarios.
  • This command must be used with the "delete remote_replication_db" command. After deleting the corresponding DCL resources, restart the system.



developer:/>delete remote_replication_dcl lun_id=0 dcl_id=3
DANGER: You are clearing the remote replication DCL of a specified LUN, this operation will forcibly delete the DCL of remote replication.
Suggestion: Before you perform this operation, please contact technical support engineers.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 758780

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next