No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
xnet showrdmapath

xnet showrdmapath

Function

The xnet showrdmapath command is used to query RDMA path information with a specified IP address.

Format

xnet showrdmapath -c [idx] -p [remote ip] -usermode

Parameters

Parameter

Description

Value

idx Instance number.

-

remote ip Remote IP address.

-

usermode This parameter is mandatory. It must be added to the end of a command as a suffix to query user state information.

The value can be:

  • "-app_data": executes the command for the app_data process.
  • "-devm": executes the command for the devm process.
  • "-sys_app": executes the command for the sys_app process.
  • "-cfg_app": executes the command for the cfg_app process.

Views

Diagnostic view

Usage Guidelines

OceanStor 18500 V5 Kunpeng, 18500F V5 Kunpeng, 18800 V5 Kunpeng and 18800F V5 Kunpeng storage systems support this command.

Example

Query information about the path from instance "1" to the specified remote IP address.

admin:/diagnose>xnet showrdmapath -c 1 -p 10.217.1.2 -app_data
========== path_mgr local_ip:127.0.0.1 ==========
========== path_mgr local_ip:10.217.0.1 ==========
========== path_mgr local_ip:10.217.2.1 ==========
========== path_mgr local_ip:10.217.4.1 ==========
========== path_mgr local_ip:10.217.1.1 ==========
********** ip 10.217.1.2 **************
----------RDMA PATH BEGIN------------
path_type   path_status port_status l_port  r_eport 
----------RDMA PATH END--------------

System Response

The following table describes the parameter meanings.

Parameter

Meaning

path_type

Path type.

path_status

Path status.

port_status

Port status.

l_port

Local port number index.

r_eport

Remote port number index.

loc_ip

Local port IP address.

remote_ip

Remote port IP address.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 748078

Downloads: 59

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next