No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show fs_snap_control task

show fs_snap_control task

Function

The show fs_snap_control task command is used to view specific steps for executing a specific file system snapshot command.

Format

show fs_snap_control task task_id=? controller=?

Parameters

Parameter

Description

Value

task_id=? ID of a task to be queried.

To obtain the value, run the "show fs_snap_control all_task_info" command.

controller=? ID of a controller.

To obtain the value, run "show controller general".

Views

Developer view

Usage Guidelines

Before performing this operation, check whether the file system snapshot task ID to be queried is correct.

Example

Query steps for executing a file system snapshot command by using the task ID and specifying the controller.

developer:/>show fs_snap_control task taskid=3 controller=0A
Time Action Result
------------------- -------------------------- ------
2015-04-30 01:28:08 CREATE TASK OK
2015-04-30 01:28:08 SNAP_ACTION_FS_COUNT INIT
2015-04-30 01:28:08 SNAP_ACTION_FS_COUNT OK
2015-04-30 01:28:08 SNAP_ACTION_FS_GETBATCH OK
2015-04-30 01:28:08 SNAP_ACTION_FS_FUZZY_QUERY OK
2015-04-30 01:28:08 SNAP_ACTION_FS_TASK_OVER OK
2015-04-30 01:28:08 FINISH OK

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Time

Task end time.

Action

Task step.

Result

Execution result.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 761121

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next