No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Advanced O&M Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show pal file_system_perfomance

show pal file_system_perfomance


The show pal file_system_perfomance command is used to query all the performance statistics information of a file system..


show pal file_system_perfomance file_system_id=? [ controller=? ]





file_system_id=? File system ID.

To obtain the value, run the "show file_system general" command without parameters.

controller=? Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".


Developer view

Usage Guidelines



Query the performance statistics information of file system "1".

developer:/>show pal file_system_perfomance file_system_id=1
OPS : 0 
 Average Response(us) : 0 
 Read Bandwidth(KB) : 0 
 Read OPS : 0 
 Read Response(us) : 0 
 Write Bandwidth(KB) : 0 
 Write OPS : 0 
 Write Response(us) : 0 
 Space Usage : 99 
 Total Space(MB) : 4294967295 
 Average Response(ms) : 0 
 Read Response(ms) : 0 
 Write Response(ms) : 0 
 Read Bandwidth(MB) : 0 
 Write Bandwidth(MB) : 0

System Response

The following table describes the parameter meanings.




Total OPS.

Average Response(us)

Average response time.

Read Bandwidth(KB)

Read bandwidth.

Read OPS

Read OPS.

Read Response(us)

Average read response time.

Write Bandwidth(KB)

Write bandwidth.

Write OPS

Write OPS.

Write Response(us)

Average write response time.

Space Usage

Space utilization.

Total Space(MB)

Space size.

Average Response(ms)

Average response time.

Read Response(ms)

Average read response time.

Write Response(ms)

Average write response time.

Read Bandwidth(MB)

Read bandwidth.

Write Bandwidth(MB)

Write bandwidth.

Updated: 2020-03-19

Document ID: EDOC1000181602

Views: 836054

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next