No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change mp_mode

change mp_mode

Function

The change mp_mode command is used to change the information about the white list of heterogeneous disk arrays.

Format

change mp_mode record_id=? path_selector=? fail_back=? fail_over=?

Parameters

Parameter

Description

Value

record_id=?

Record ID.

The value can be an integer from 0 to 2147483647. To obtain the value, run "show mp_mode".

path_selector=?

Algorithm used by a storage system to select a path.

The value can be "FIX", "ROUND_ROBIN", or "LEAST_QUEUE".

fail_back=?

Mode used by a storage system to restore faulty links.

The value can be "FAILBACK_IMMEDIAT", "NOT_FAILBACK", or "DELAY_FAILBACK", where,

  • FAILBACK_IMMEDIATE: Failback will be performed immediately.
  • NOT_FAILBACK: Failback will not be performed.
  • DELAY_FAILBACK: Failback will be postponed.

fail_over=?

Whether path failover is supported.

The value can be "ENABLE" or "DISABLE", where,

  • ENABLE: to enable failover.
  • DISABLE: to disable failover.

Views

Developer view

Usage Guidelines

None

Example

Change the information about the white list of heterogeneous disk arrays.

developer:/>change mp_mode record_id=59 path_selector=FIX fail_back=NOT_FAILBACK fail_over=ENABLE 
WARNING: You are about to change the whitelist configurations of the corresponding heterogeneous array. This operation may affect the service performance of the heterogeneous array. 
Suggestion: Before performing this operation, ensure that you know the impact of the heterogeneous path selection algorithm, failover policy, and failback policy on service performance. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 627641

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next