No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
clear nfs connection

clear nfs connection


The clear nfs connection command is used to close the specified NFS connection.


clear nfs connection [ server_ip=? ] [ client_ip=? ] [ client_port=? ] [ controller=? ]





server_ip=? IP address of the server.

IPv4 or IPv6 address.

client_ip=? IP address of the client.

IPv4 or IPv6 address.

client_port=? ID of the client port.

The value ranges from 1 to 65535.

controller=? Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".


Developer view

Usage Guidelines



Close the NFS connection.

developer:/>clear nfs connection controller=0A server_ip=
WARNING: You are about to disconnect the NFS service network of the client. This operation may interrupt client NFS services.
Suggestion: Confirm that you know about the impact before running this command.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 763412

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next