Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sys showdiflevel
Function
The sys showdiflevel command is used to view data integrity field (DIF) levels.
Format
sys showdiflevel
Parameters
None
Views
Diagnostic view
Usage Guidelines
None
Example
View DIF levels.
admin:/diagnose>sys showdiflevel
module id verify level
--------- ------------
0 2
1 2
2 2
3 2
4 2
5 2
6 2
7 2
8 2
9 2
10 2
11 2
12 2
13 2
14 2
15 2
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
module id |
Service module ID. |
verify level |
Verification level. |
Previous
