No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
netqos getprofileidx

netqos getprofileidx


The netqos getprofileidx command is used to query the QoS template IDs of network ports.


netqos getprofileidx




Diagnostic view

Usage Guidelines



Query all network ports that have been configured with QoS and the corresponding template IDs.

admin:/diagnose>netqos getprofileidx -devm
port number : 10
eth0 : 8
eth1 : 8
eth2 : 8
eth3 : 8
eth4 : 8
eth5 : 8
eth-s0 : 5
eth-s1 : 5
eth-s2 : 5
eth-s3 : 5

System Response

The following table describes the parameter meanings.



port number

Number of network ports that have been configured with QoS.

eth0 : 8

The left part of the colon indicates the network port name, and the right part indicates the template ID.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 748789

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next