No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
volume showextentid

volume showextentid

Function

The volume showextentid command is used to view the extent ID corresponding to the logical block addressing (LBA) of a thick volume.

Format

volume showextentid lba extentSize

Parameters

Parameter

Description

Value

lba Logical block addressing (LBA).

The value ranges from 0 to

the volume capacity minus

one, expressed in sectors.

extentSize Extent size.

The unit is KB.

Views

Diagnostic view

Usage Guidelines

None

Example

View the extent ID corresponding to the LBA of a thick LUN.

admin:/diagnose>volume showextentid 0 4096
extent Id:0x2fef

System Response

The following table describes the parameter meanings.

Parameter

Meaning

extent Id

Extent ID.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 747978

Downloads: 59

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next