Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
lm showsysevent
Function
The lm showsysevent command is used to check the system events of a LUN migration.
Format
lm showsysevent
Parameters
None
Views
Diagnostic view
Usage Guidelines
None
Example
To check the system events of a LUN migration, run the following command.
admin:/diagnose>lm showsysevent
----system event type(LM_SYS_JOB_COMPLETE_EVENT), remain(0)----
----system event type(LM_SYS_JOB_FAULT_EVENT), remain(0)----
----system event type(LM_SYS_IO_ERROR_EVENT), remain(0)----
----system event type(LM_SYS_LUN_RECOVER_EVENT), remain(0)----
----system event type(LM_SYS_START_LUN_EVENT), remain(0)----
----system event type(LM_SYS_STOP_LUN_EVENT), remain(0)----
----system event type(LM_SYS_START_BGR_EVENT), remain(0)----
----system event type(LM_SYS_STOP_BGR_EVENT), remain(0)----
----system event type(LM_SYS_MASTER_RECOVER_EVENT), remain(0)----
----system event type(LM_SYS_XNET_DATA_LINKUP_EVENT), remain(0)----
----system event type(LM_SYS_SYNC_DB_LOG_TO_GDB), remain(0)----
----system event type(LM_SYS_LM_HEAL_EVENT), remain(0)----
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
system event type |
System event type. |
remain |
Number of the events waiting to be processed. |
Previous
