No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain stripe_verify_restore

change disk_domain stripe_verify_restore


The change disk_domain stripe_verify_restore command is used to repair inconsistent stripes.


change disk_domain stripe_verify_restore disk_domain_id=? [ run_state=? ]

change disk_domain stripe_verify_restore disk_domain_id=? [ ckg_object_id=? ] [ ckg_lba=? ] [ length=? ]

change disk_domain stripe_verify_restore disk_domain_id=? [ ckg_object_id=? ]






Disk domain ID.

To obtain the value, run the "show disk_domain general" command in guest view.


Operating status of stripe consistency repair.

The value can be "start", "pause", "restart" or "stop", where:

  • "start": enables stripe consistency repair.
  • "stop": disables stripe consistency repair.
  • "restart": restarts stripe consistency repair and clears the progress of the last stripe consistency repair.


Chunk group ID.

To obtain the value, run the "ckgiof luntrans" command in diagnose in developer view.


Offset in a CKG.

Value depends on the size CKG Set, in units of a sector.


Length of the stripe to be repaired.

Value depends on the size CKG Set, in units of a sector.


Developer view

Usage Guidelines

If the disklog is lost, running this command can:

  • Repair inconsistent stripes in all the allocated space in the disk domain.
  • Repair inconsistent stripes in the specified chunk group (CKG).
  • Repair inconsistent stripes in a certain extent in the CKG.

Before running this command, ensure that no disk out or fault events occur. If these events exist, run this command after the global disk reconstruction is complete.


Repair inconsistent stripes. Before running this command, ensure that the reconstruction task is complete, disk domain ID is 0, and no disk out or fault events or data reconstruction or copy tasks in the disk domain.

developer:/>change disk_domain stripe_verify_restore disk_domain_id=0 run_state=start 
DANGER: You are about to repair inconsistent stripes in disk_domain. This operation repairs parity data for RAID 3, 5, and 6 and does not change data bits. For RAID 10, this operation selects a disk in the mirror group, uses data on the disk to repair other disk in the mirror group, and restores stripe consistency after the repair. However, data accuracy cannot be ensured. If disk out or fault events occur during the repair, data may be lost. 
Suggestion: Confirm the operation before performing it. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully. 

System Response


Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 661170

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next