No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change smartqos_policy switch

change smartqos_policy switch

Function

The change smartqos_policy switch command is used to enable or disable quality of service (QoS).

Format

change smartqos_policy switch switch=?

Parameters

Parameter

Description

Value

switch=?

Whether QoS is enabled.

Possible values are:

  • on: QoS is enabled.
  • off: QoS is disabled.

Views

Developer view

Usage Guidelines

None

Example

  • Enable QoS.
    developer:/>change smartqos_policy switch switch=on 
    WARNING: You are about to enable/disable the QoS function. This operation may affect system performance. 
    Suggestion: Before performing this operation, ensure that services have been stopped. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.
  • Disable QoS.
    developer:/>change smartqos_policy switch switch=off 
    WARNING: You are about to enable/disable the QoS function. This operation may affect system performance. 
    Suggestion: Before performing this operation, ensure that services have been stopped. 
    Have you read warning message carefully?(y/n)y 
    Are you sure you really want to perform the operation?(y/n)y 
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 628922

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next