Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
extent showfastmigrationmode
Function
The extent showfastmigrationmode command is used to check whether the fast migration mode is enabled.
Format
extent showfastmigrationmode
Parameters
None
Views
Diagnostic view
Usage Guidelines
None
Example
To check whether the fast migration mode is enabled, run the following command.
admin:/diagnose>extent showfastmigrationmode
Fast migration mode : yes
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Fast migration mode |
Whether the fast migration mode is enabled. |
Previous
