Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show third_party_policy region
Function
The show third_party_policy region command is used to query the regions monitored by third-party policies.
Format
show third_party_policy region [ policy_name=? ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
policy_name=? |
Policy name. |
The value contains 1 to 31 characters including only letters (case insensitive), digits, and underscores (_). |
Views
Developer view, vstore developer view
Usage Guidelines
None
Example
- Query the regions monitored by third-party policies under the current vStore.
developer:/>show third_party_policy region Policy ID Policy Name Nfs Shareids To Include -------- -------- ------------ 1 test1 *
- Query the region monitored by a specified third-party policy.
developer:/>show third_party_policy region policy_name=test Policy ID: 1 Policy Name: test Nfs Shareids To Include: *
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Policy ID |
Policy ID. |
Policy Name |
Policy name. |
Nfs Shareids To Include |
ID list of NFS shares to be monitored. |
Previous
