No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove snapshot_group snapshot

remove snapshot_group snapshot


The remove snapshot_group snapshot command is used to remove a snapshot from a specified snapshot group.


remove snapshot_group snapshot snapshot_group_id=? snapshot_id=?





snapshot_group_id Snapshot group ID.

The value is an integer ranging from 0 to 8191.

snapshot_id ID of a snapshot.

To obtain the value, run "show snapshot general".


Developer view

Usage Guidelines



Remove snapshot "1" from snapshot group "0".

developer:/>remove snapshot_group snapshot snapshot_group_id=0 snapshot_id=1
WARNING: You are about to remove the selected snapshot from its snapshot group.
This operation will prevent the applications associated with the snapshot group from accessing the removed snapshot.
Suggestion: Before you perform this operation, ensure that the preceding risk is acceptable and the correct snapshot is selected.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Remove snapshot 1 from snapshot group successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 748922

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next