No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
os passwdmax

os passwdmax


The os passwdmax command is used to change the maximum life cycle of a user password.


os passwdmax maxday=? username=?





maxday=? Maximum life cycle of a user password, expressed in days.

The value is an integer ranging from 0 to 999 and must be greater than the minimum life cycle of the user password.

Username=? Name of the user for which the maximum password life cycle is set.

The value is an existing user name.


Diagnostic view

Usage Guidelines



Change the maximum life cycle of a user password.

_super_admin:/diagnose>os passwdmax 60 testuser
passwd: password expiry information changed.
Set maximum password lifetime succeed.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 749002

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next