Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
epl showldev
Function
The epl showldev command is used to view information about the remote logical disk array.
Format
epl showldev [ -l logicID ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
logicID |
ID of a logical disk array. |
To obtain the value, run the "epl showldev" command. |
Views
Diagnostic view
Usage Guidelines
None
Example
View information about the remote logical disk array.
admin:/diagnose>epl showldev
==================== LogicArray(0): =======================
LogicId ArrayID LinkCnt LiveLink Status Ref Compatible
0 0 2 2 BOTH 4 2
Logic device: 0, devName:Huawei.Storage
CTRL 0 READY has 1 live link(s), totalBand(8000000), curLoad(0), aveLoad(100834).maxcSend(2048) curcSend(2048) lengthSend(192904)
link Id: 0, idx: 0, sdev: 32768, bandwidth: 8000000, status: READY; maxLoad(2000000), curLoad(0), lenSend(192904)
flowctrl: 0
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
LogicId |
ID of a logical disk array. |
ArrayID |
ID of a physical disk array. |
LinkCnt |
Total number of links. |
LiveLink |
Number of available links. |
Status |
Status of a logical disk array. |
Ref |
Count of references. |
Compatible |
Compatibility of a disk array. |
Previous
