Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
volume showresformatinfo
Function
The volume showresformatinfo command is used to view formatting information of resource management.
Format
volume showresformatinfo [ on | off ]
Parameters
Parameter |
Description |
Value |
|---|---|---|
on |
If a fault occurs, information about REQs that are being formatted is displayed. |
- |
off |
Information about REQs that are being formatted is not displayed. The default value is off. |
- |
Views
Diagnostic view
Usage Guidelines
None
Example
View formatting information of resource management.
admin:/diagnose>volume showresformatinfo
Format info when reAlloc:
State : Idle
Req num : 0
Threshold : 131072
Current Send Cap : 0
Finished Cap : 0
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
State |
Task status. |
Req num |
Number of nodes in the formatting linked list. |
Threshold |
Concurrency threshold. |
Current Send Cap |
Current concurrent bandwidth. |
Finished Cap |
Finished bandwidth. |
Previous
