No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete fs_remote_replication rss_type

delete fs_remote_replication rss_type


The delete fs_remote_replication rss_type command is used to forcibly delete the remote replication property of a specified file system.


delete fs_remote_replication rss_type file_system_id=? role=?





file_system_id=? Indicates the ID of a file system.

To obtain the value, run "show file_system general".

role=? Indicates the file system type.

The value can be "primary" and "secondary", where:

  • primary: the file system is the primary file system of the remote replication.
  • secondary: the file system is the secondary file system of the remote replication.


Developer view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can only be used when you need to unset the fsType and you cannot delete the remote replication with incorrect DB information. Do not use this command in other scenarios.
  • This command must be used with the "delete fs_remote_replication feature_db" command. Restart the system after running the commands.


To delete the remote replication property of file system "5", run the following command.

developer:/>delete fs_remote_replication rss_type file_system_id=5 role=primary
DANGER: You are about to forcibly maintain file system remote replication. This operation will cause the corresponding value-added pair to be unavailable.
This operation enables you to forcibly delete the configuration information about a single item of file system remote replication if file system remote replication objects cannot be deleted properly.
Suggestion: Before performing this operation, contract R&D engineers, perform all procedures under their guidance, and confirm the operation.
1. The system is not configured by other users.
2. The parameter values that are entered are correct.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 743267

Downloads: 59

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next