No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_metro_vstore_pair db

delete hyper_metro_vstore_pair db


The delete hyper_metro_vstore_pair db command is used to forcibly delete the database of a vStore pair from a specific vStore.


delete hyper_metro_vstore_pair db local_pair_id=? db_index=?





local_pair_id=? Local vStore pair ID.

Export the CCDB and check the incorrect local_pair_id.

db_index=? vStore database index.

Export the GDB and check the incorrect index.


Developer view, vstore user view

Usage Guidelines

  • Do not use this command without R&D engineers' guidance. This command can be used to delete the vStore pair database when the vStore pair database is incorrect and the vStore pair cannot be deleted on the CLI. Do not use this command in other scenarios.
  • This command must be used with the "delete hyper_metro_vstore_pair rss" command. After deleting the corresponding vStore pair database, restart the system.


Delete the database of the HyperMetro vStore pair whose local pair ID and database index are 0.

developer:/>delete hyper_metro_vstore_pair db local_pair_id=0 db_index=0
DANGER: You are about to forcibly maintain the HyperMetro vStore pair database configuration. This operation will make the corresponding HyperMetro vStore pair unavailable.
This operation enables you to forcibly delete a single configuration item of a HyperMetro vStore pair if HyperMetro vStore pair objects cannot be deleted properly.
Suggestion: Before performing this operation, contract R&D engineers and confirm the following:
1. The system is not being configured by other users.
2. The entered parameter values are correct.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 762333

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next