No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
bdinfo

bdinfo

Function

The bdinfo command is used to print the board structure information.

Format

bdinfo

Parameters

None

Modes

serial port mode

Usage Guidelines

None

Example

Print the board structure.

Hi1710_UBOOT> bdinfo
arch_number = 0x00000AE7
env_t       = 0x00000000
boot_params = 0x81800100
DRAM bank   = 0x00000000
-> start    = 0x80000000
-> size     = 0x10000000
ethaddr     = 00:11:22:33:44:AA
ip_addr     = 192.168.10.186
baudrate    = 9600 bps

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 763467

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next