Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
loop
Function
The loop command is used to conduct the loopback test on a group of addresses.
Format
loop [.b, .w, .l] address number_of_objects
Parameters
Parameter |
Description |
Value |
|---|---|---|
address |
Test address. |
Enter the value as required. |
number_of_objects |
Number of tested objects. |
Enter the value as required. |
Modes
serial port mode
Usage Guidelines
None
Example
None
System Response
None
Previous
