No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show nfs nfsv4_stat

show nfs nfsv4_stat

Function

The show nfs nfsv4_stat command is used to show NFSv4 procedure statistics.

Format

show nfs nfsv4_stat [ controller=? ]

Parameters

Parameter

Description

Value

controller=? Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".

Views

Developer view

Usage Guidelines

None

Example

To show NFSv4 procedure statistics, run the following command:

developer:/>show nfs nfsv4_stat controller=0A
Procedure Counts Success Failure Drop Maximal Delay Average Delay File System Maximal Delay File System Average Delay
NULL 0 0 0 0 0 0 0 0 
ACCESS 0 0 0 0 0 0 0 0 
CLOSE 0 0 0 0 0 0 0 0 
COMMIT 0 0 0 0 0 0 0 0 
CREATE 0 0 0 0 0 0 0 0 
DELEGPURGE 0 0 0 0 0 0 0 0 
DELEGRETURN 0 0 0 0 0 0 0 0 
GETATTR 0 0 0 0 0 0 0 0 
GETFH 0 0 0 0 0 0 0 0 
LINK 0 0 0 0 0 0 0 0 
LOCK 0 0 0 0 0 0 0 0 
LOCKT 0 0 0 0 0 0 0 0 
LOCKU 0 0 0 0 0 0 0 0 
LOOKUP 0 0 0 0 0 0 0 0 
LOOKUPP 0 0 0 0 0 0 0 0 
NVERIFY 0 0 0 0 0 0 0 0 
OPEN 0 0 0 0 0 0 0 0 
OPENATTR 0 0 0 0 0 0 0 0 
OPEN_CONFIRM 0 0 0 0 0 0 0 0 
OPEN_DOWNGRADE 0 0 0 0 0 0 0 0 
PUTFH 0 0 0 0 0 0 0 0 
PUTPUBFH 0 0 0 0 0 0 0 0 
PUTROOTFH 0 0 0 0 0 0 0 0 
READ 0 0 0 0 0 0 0 0 
READDIR 0 0 0 0 0 0 0 0 
READLINK 0 0 0 0 0 0 0 0 
REMOVE 0 0 0 0 0 0 0 0 
RENAME 0 0 0 0 0 0 0 0 
RENEW 0 0 0 0 0 0 0 0 
RESTOREFH 0 0 0 0 0 0 0 0 
SAVEFH 0 0 0 0 0 0 0 0 
SECINFO 0 0 0 0 0 0 0 0 
SETATTR 0 0 0 0 0 0 0 0 
SETCLIENTID 0 0 0 0 0 0 0 0 
SETCLIENTID_CONFIRM 0 0 0 0 0 0 0 0 
VERIFY 0 0 0 0 0 0 0 0 
WRITE 0 0 0 0 0 0 0 0 
RELEASE_LOCKOWNER 0 0 0 0 0 0 0 0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Procedure

Name of the procedure.

Counts

Number of the processed procedure.

Success

Number of the successfully processed procedure.

Failure

Number of the unsuccessfully processed procedure.

Drop

Number of the dropped processed procedure.

Maximal Delay

Maximal delay of processing procedure.

Average Delay

Average delay of processing procedure.

File System Maximal Delay

Maximal delay of the file system process.

File System Average Delay

Average delay of the file system process.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 763603

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next