No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


The command is used to run commands related to the BDM module.

Format -h [sdId] -a





-h Shows help information.


-a Shows functions of each subcommand of the BDM module.


[sdId] End the diagnosing state of a disk.



Minisystem mode

Usage Guidelines

This command is used to end the diagnosing state of a disk. Use the command under the guidance of technical support engineers.

OceanStor 18500 V5, 18500F V5, 18800 V5 and 18800F V5 storage systems support this command.


End the diagnosing state of a disk.

Storage: minisystem> 72
admin:/diagnose>sddebug triggerDiagEnd 72
[BDM SD]Trigger diagEnd action for sdId 72 ok.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 760094

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next