Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change hyper_metro most_domain_enabled
Function
The change hyper_metro most_domain_enabled command is used to enable the large-specification HyperMetro domain function that allows the number of supported HyperMetro domains to exceed the upper limit.
Format
change hyper_metro most_domain_enabled enabled=?
Parameters
Parameter |
Description |
Value |
|---|---|---|
enabled |
Whether the large-specifications HyperMetro domain function is enabled. |
The value can be "yes", where: "yes": The function is enabled. |
Views
Developer view
Usage Guidelines
To enable the large-specification HyperMetro domain function, run the "change hypermetro most_domain_enabled enabled=yes" command in developer mode on two storage arrays separately.
Example
Enable the large-specifications HyperMetro domain function.
developer:/>change hyper_metro most_domain_enable enabled=yes
Command executed successfully.
System Response
None
Previous
