No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dha singlemodelconfig

show dha singlemodelconfig


The show dha singlemodelconfig command is used to query DHA single-factor judgment configurations.


show dha singlemodelconfig vendor=? disk_type=? model_type=?





vendor=? Disk vendor.

The value can be "seagate", "west_digital", "hitachi", "fujitsu", "toshiba", "huawei" or "samsung", where:

  • seagate: Seagate.
  • west_digital: West Digital.
  • hitachi: Hitachi.
  • fujitsu: Fujitsu.
  • toshiba: Toshiba.
  • huawei: Huawei.
  • samsung: Samsung.
disk_type=? Disk type.

The value can be "fc", "sas", "sata", "ssd", or "nlsas", where:

  • fc: Fibre Channel disk.
  • sas: SAS disk.
  • sata: SATA disk.
  • ssd: Solid state disk.
  • nlsas: NL-SAS disk.
model_type=? Model type.

The value can be "glist", "medium", "recovered", or "timeout", where:

  • glist: glist model.
  • medium: medium model.
  • recovered: recovered model.
  • timeout: timeout model.


Developer view

Usage Guidelines

As the DHA single-factor model configuration includes the total count model and increment count model (related to time), the threshold and switch status will be returned after the command is executed.


Query the glist configuration of Seagate SAS disks.

developer:/>show dha singlemodelconfig vendor=seagate disk_type=sas model_type=glist      
  Vendor                 : Seagate
  Type                   : SAS
  Model Type             : GList
  Total Count Switch     : On
  Total Count Thresh     : 200
  Increment Count Switch : On
  Increment Count Thresh : 100
  Increment Time Thresh  : 7

System Response

The following table describes the parameter meanings.




Disk vendor.


Disk type.

Model Type

Model type.

Total Count Switch

Total count switch.

Total Count Thresh

Threshold of the total count model.

Increment Count Switch

Increment count switch.

Increment Count Thresh

Threshold of the increment count model.

Increment Time Thresh

Time threshold of the increment count model.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 758428

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next