No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cliget -d iocardbaseinfo

cliget -d iocardbaseinfo

Function

The cliget -d iocardbaseinfo command is used to query information about interface modules.

Format

cliget -d iocardbaseinfo <slotnum>

Parameters

Parameter

Description

Value

slotnum Slot ID.

For a 2 U entry-level controller enclosure, the value is from 0 to 2.

For a 2 U midrange controller enclosure, the value is from 0 to 5.

For a 4 U high-end controller enclosure, the value is from 0 to 27.

Modes

serial port mode

Usage Guidelines

OceanStor 18500 V5 Kunpeng, 18500F V5 Kunpeng, 18800 V5 Kunpeng and 18800F V5 Kunpeng storage systems support this command.

Example

Query the information about the interface module in slot "1". The command output varies depending on a specific product.

iBMC:/->cliget -d iocardbaseinfo 1
slotId       : 1
PCBVer       : 0
TypeErr      : 0
CardType     : 0x243
Qos.mode     : 0x1
Qos.speed    : 0x15
HiLinkType   : 3
Temp0        : 57
Temp1        : 30719
Temp2        : 30719
ErrCode      : 0
UpgradeStatus: 0
MCuversion   :     
    HwVer    : 0    
    PcbVer   : 0    
    SoftVer  : 10.01.01T43

System Response

The following table describes the parameter meanings.

Parameter

Meaning

slotId

Slot ID.

PCBVer

PCB version number.

TypeErr

Type error status.

CardType

Card type.

Qos.mode

QoS mode.

Qos.speed

QoS speed.

HiLinkType

HiLink type.

Temp0

Temperature 0.

Temp1

Temperature 1.

Temp2

Temperature 2.

ErrCode

Error code.

UpgradeStatus

Upgrade status.

MCuVersion

MCU version number.

HwVer

Hardware version number.

PcbVer

PCB version number.

softVer

Software version number.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 749028

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next