No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
xrb showintermem

xrb showintermem

Function

The xrb showintermem command is used to show usage of internal resources on a connection.

Format

xrb showintermem -s seqid

Parameters

Parameter

Description

Value

seqid Logical connection ID of XNET.

The value ranges from 0 to 0xffffffff.

Views

Diagnostic view

Usage Guidelines

None

Example

Show usage of internal resources on connection "16".

admin:/diagnose> xrb showintermem -s 16
Show conn(16) internal resource info:
Recvd Shells: 16
TX_Alloc REQ: 55
TX_Req Msg: 56
TX_Post Msg: 56
TX_Response: 56
RX_Local SGL: 56
RX_TimeoutCTX: 56
RX_Resp Msg: 56
Quota enable flag: 1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

conn

Connection ID.

Recvd Shells

Count of Recvd Shells at the receiver end.

TX_Alloc REQ

Count of Alloc REQs at the sender end.

TX_Req Msg

Count of request messages at the sender end.

TX_Post Msg

Count of post messages at the sender end.

TX_Response

Count of responses at the sender end.

RX_Local SGL

Count of Local SGL at the receiver end.

RX_TimeoutCTX

Count of timeout contexts at the receiver end.

RX_Resp Msg

Count of response messages at the receiver end.

Quota enable flag

Quota switch.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 744311

Downloads: 59

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next