No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr showverifyprog

mrr showverifyprog

Function

The mrr showverifyprog command is used to view the progress of metadata verification.

Format

mrr showverifyprog -t type -p poolId

Parameters

Parameter

Description

Value

type ID of a metadata verify type.

Possible values are "0" and "1".

  • 0:ckg and chunk.
  • 1:ckg bitmap.
poolId Disk domain ID.

The ID can be obtained by running the show disk_domain general command.

Views

Diagnostic view

Usage Guidelines

None

Example

View the metadata verification progress.

admin:/diagnose>mrr showverifyprog -t 0 -p 0
Status                        : Verify
Progress                      : [--/--] --
Start Time                    : 2015-09-07 11:55:42
End Time                      : 2015-09-07 11:55:42
Remain Time                   : --
Result                        : Success

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Status

Indicates the status.

Progress

Indicates the progress.

Start Time

Indicates the start time of the operation.

End Time

Indicates the end time of the operation.

Remain Time

Indicates the remain time.

Result

Indicates the result of the operation.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 751738

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next