No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change system support_enclosure

change system support_enclosure


The change system support_enclosure command is used to change types of disk enclosures supported by the system.


change system support_enclosure list=?






System supported enclosure type ID.

  • the list of parameters only support numbers, separated by commas.
  • the digital range is 1-255.
  • the list of parameters can not enter a duplicate number.


Developer view

Usage Guidelines

  • Before running this command, run the "show system support_enclosure" command to confirm configuration of disk enclosure types supported by the system currently.
  • All disk enclosures types supported by the system need to be entered for the command configuration parameter.


Change types of disk enclosures supported by the system.

developer:/>change system support_enclosure list=24,25,39 
DANGER:You are about to reconfigure types of disk enclosures supported by the system.The operation has the following impact: 
1. This operation will overwrite the default disk enclosure types supported by the system. 
2. After the configuration takes effect, disk enclosures that are not in the configuration list cannot access the system. 
Suggestion: Before performing this operation, contact R&D engineers and complete all operations under their guidance. In the mean time, ensure that: 
The entered configuration list contains all disk enclosures supported by the system. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 652267

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next