No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Purpose

Based on the CLI provided by the DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands.

The commands provided in this document are used for debugging and maintenance of storage systems, and ask for a higher execution permission than the commands run in the user view. It is recommended that they should be executed by experienced engineers with caution or under the guidance of Huawei engineers.

An improper execution of any command may interrupt ongoing services and cause storage system failures. Users' decisions to use those commands by their own are entirely at their own risk.

This document is applicable to the following product models.

Product Series

Product Model

OceanStor 5000 V5 series

OceanStor 5300 V5, 5500 V5, 5600 V5, and 5800 V5

OceanStor 6000 V5 series

OceanStor 6800 V5

OceanStor 5000F V5 series

OceanStor 5300F V5, 5500F V5, 5600F V5, and 5800F V5

OceanStor 6000F V5 series

OceanStor 6800F V5

Intended Audience

This document is intended for:
  • Technical support engineers
  • Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 07 (2019-05-15)

This is the seventh official release. The updates are as follows:

Added, modified, and deleted some commands.

Issue 06 (2019-03-30)

This issue is the sixth official release, which incorporates the following changes:

Added, modified, and deleted some commands.

Issue 05 (2018-12-06)

This is the fifth official release. The updates are as follows:

Added commands:

  • change dha aimodel
  • show dha aimodel
  • change cable check_switch
  • show cable check_switch
  • show disk difresult
  • eam.sh
  • show disk_domain repair_pool_meta
  • disklog queryalignbst
  • show hyper_metro general
  • change hyper_metro general
  • show ftds delay_statistics_switch
  • change ftds delay_statistics_switch
  • show disk_domain data_persistence_check
  • change port eth_toe_switch
  • show port eth_toe_switch
  • change data_persistence_check switch
  • change smart_cache general
  • show smart_cache general
  • show data_persistence_check switch
  • show disk_domain auto_stripe_verify
  • change disk_domain auto_stripe_verify
  • change system interrupt_coalesce
  • show system interrupt_coalesce
  • show disk upgrade_status
  • change nfs reserve_bit
  • show nfs reserve_bit
  • change nfs nfsv3_readdirplus_buf
  • show nfs nfsv3_readdirplus_buf
  • bdm_trigger_diagend.sh
  • change nfs pre_op_attr_switch
  • show nfs pre_op_attr_switch
  • show disk dif_error_stat
  • change nfs long_filename_support
  • show nfs long_filename_support
  • show tgt_switch ini_white_list
  • change tgt_switch ini_white_list
  • spa showreclaiminfo
  • change nfs nfsv3_sync_switch
  • show nfs nfsv3_sync_switch
  • tcp_tw_reuse_switch.sh
  • eam showtypeport
  • eam showlifiduse
  • eam showjiffies
  • eam showfctgtlink
  • eam showiscsitgtlink
  • eam showfailoverpathindex
  • eam showfailoverpath
  • eam showcheckresult
  • eam showport
  • eam showallport
  • bdm_show_sedauth.sh
  • xnetpal maxnoschtime
  • show dha modelpolicy
  • change dha modelpolicy

Modified commands:

  • change disk_domain relocation_task
  • cmm show mem
  • xnet.sh
  • show iotrace switch
  • show cluster general
  • drvfc showperfstatic
  • xrb delay
  • dif showverifyresult
  • xnet showrcvq
  • change cluster general
  • drvunf showtgtioprofile
  • om_show_omm_info.sh
  • change cache fs_dsgbase_concur
  • change cache file_system_hitcount
  • change cpu frequency
  • change disk clearerrordlt
  • change disk_domain stripe_restore_repair
  • drvist showperf
  • show fs_security descriptor
  • space.sh
  • sys showcmdlist
  • add shake_alarm general
  • show dha scorestrategy
  • show dha singlemodelconfig
  • change dha scorestrategy
  • minisystem
  • clear configuration_data
  • show tgt_switch loss_inq
  • show tgt_switch caw_feature
  • show driver queuedepth
  • change system force_write_back
  • poweroff enclosure
  • sys.sh
  • change shake_alarm general
  • show system force_write_back
  • drvunf showiniioprofile
  • cgroup_manage.sh
  • upgrade disk
  • show disk_domain verify_pool_meta
  • change disk_domain verify_pool_meta
  • proto nas_vfs show_file_by_path
  • show tgt_switch vxvm_dmp_feature
  • show client top
  • show file top
  • show file_system top
  • remove system management_ip
  • remove system maintenance_ip
  • help
  • drvisi showperf
  • change dha singlemodelconfig
  • swap dr_star_member remote_replication
  • show space global_config
  • change smartqos_policy switch
  • change disk_reliability_policy slow_disk_detect
  • show disk_reliability_policy slow_disk_detect
  • change space global_config
  • change spaceflow general
  • show space dmn_info
  • clear cifs connection
  • show dha aimodel
  • eam.sh
  • show tgt_switch lun_4k_mapping
  • change tgt_switch lun_4k_mapping
  • show ftds delay_statistics_switch
  • change ftds delay_statistics_switch
  • change dha aimodel
  • change port eth_toe_switch
  • change data_persistence_check switch
  • change smart_cache general
  • show smart_cache general
  • show disk_domain auto_stripe_verify
  • cache.sh
  • change system interrupt_coalesce
  • show system interrupt_coalesce
  • change nfs reserve_bit
  • show nfs reserve_bit
  • change nfs nfsv3_readdirplus_buf
  • show nfs nfsv3_readdirplus_buf
  • show nfs pre_op_attr_switch
  • show disk dif_error_stat
  • change nfs pre_op_attr_switch
  • show tgt_switch ini_white_list

Issue 04 (2018-07-30)

This is the fourth official release. The updates are as follows:

Added commands:

  • show ldap_server general
  • change ldap_server
  • show rsf upgrade_check_info
  • export file_system_tier_info
  • swap dr_star_member remote_replication
  • show nfs nfsv41_session_forechannel
  • change nfs nfsv41_session_forechannel
  • change disk_domain disk_log
  • show disk_domain disk_log
  • change lun_takeover enhance_switch
  • show nas_mem slot_info
  • show upgrade port_failover_switch
  • change upgrade port_failover_switch
  • add snapshot_group snapshot
  • remove snapshot_group snapshot
  • show takeover_switch global_enhanced_masquerading_switch
  • show nfs nfsv41_stat
  • clear nfs nfsv41_stat
  • rst_svc_ctl.sh
  • show nfs nfsv41_err_stat
  • show disk_domain set_disk_group
  • change takeover_switch global_enhanced_masquerading_switch
  • show nas_log function_debug_info
  • change nas_log function_debug_info
  • proto nas_vfs show_file_by_path
  • change nfs nfsv4_idmap_numerical
  • show nfs nfsv4_idmap_numerical
  • change tgt_switch vxvm_dmp_feature
  • memstat.sh
  • show tgt_switch vxvm_dmp_feature
  • change hyper_metro_consistency_group general*
  • change hyper_metro_pair general*
  • show client top
  • show file top
  • show file_system top
  • show disk_group
  • change remote_replication startup
  • change consistency_group startup
  • scsi showvaaistat
  • scsi showreportlun
  • ntpq
  • rephc showtntstatus
  • rephc queryarrayinfo
  • rephc queryisoinfo
  • rephc showalltntpairlock
  • rephc shownastaskinfo
  • change nfs nfsv41_session_trunking_support
  • show nfs nfsv41_session_trunking_support

Modified commands:

  • delete quorum_server_link db
  • pal rescue showtaskinfo
  • change disk_domain format_parallel
  • quota show volhang
  • delete configuration_log
  • delete quorum_server db
  • quota show poolhang
  • change fdsa switch
  • eam alarm
  • delete clone_db
  • delete clone_dcl
  • delete clone_rsstype
  • upgradesystem
  • show dedup_compress_lun general
  • Qos show vol_poss
  • show cache_partition ratio
  • show disk_domain format_mode
  • change disk_domain format_mode
  • qos show io_class_timerecord
  • ckgiof showincon
  • ckgiof ckgtrans
  • ms showdisk
  • kvdb calcucrc
  • nmgr showinst
  • spa extlist
  • spa crccheck
  • import oem_package
  • qos show io_class_schdinfo
  • Qos show io_class_param
  • change storage_pool repair_lun
  • bgr showcounter
  • change logical_port failover_switch
  • sysforcepoweron
  • change cluster controllers
  • test logical_port failover
  • change fdsa check_item_switch
  • change logical_port failover
  • change cache_partition write_policy
  • upgrade_clearflag.sh
  • eam showevent
  • change iod schedule_information
  • show nfs nfsv4_opened_files
  • create upgrade session
  • change hyper_metro_pair cfg_switch
  • show ddp domain_info
  • show hyper_metro_pair cfg_switch
  • arb showall
  • arb showtrace
  • change cache_partition ratio
  • change cifs keep_alive_switch
  • change cifs keep_idle
  • change cifs log_level
  • change cifs reserve_bit
  • change cifs rtt_switch
  • change cifs smb3_switch
  • change file_system amend
  • change file_system check
  • change file_system force_expand
  • change file_system min_fs
  • change file_system vstore
  • change fs_clone split_concurrent_num
  • change fs_clone split_concurrent_size
  • change fs_clone split_force
  • change fs_snapshot check_strategy
  • change remote_replication cfg_switch
  • change service ndmp_delete_snapshot
  • change space check_space_consistency
  • change space rescue_config
  • change statistics_switch ftp
  • change system external_tlv_channel
  • clear cifs connection
  • clear cifs fp_record
  • clear cifs server_stat
  • clear cifs smb1_stat
  • clear cifs smb2_stat
  • clear fs_snapshot residual_clone_ref
  • clear performance ndmp
  • clear pim stat
  • delete file_system force
  • delete file_system scrub_error_info
  • delete hyper_metro_pair dump
  • disklog repairio
  • disklog showobj
  • export file_system dirtydata
  • mr showblkmgr
  • mr showckgmgr
  • mr showfilestatus
  • mr showflowcnt
  • mr showloginfo
  • mr showstatus
  • mr showtreehandle
  • mrm showcounter
  • mrr repairextentcountshow
  • mrr showflow
  • mrr showrpoolaction
  • ms showscan
  • ms showtask
  • show antivirus mempool
  • show antivirus scan
  • show cifs connection
  • show cifs fp_record
  • show cifs reserve_bit
  • show cifs rtt_switch
  • show cifs server_info
  • show cifs server_stat
  • show cifs smb2_stat
  • show cifs smb3_switch
  • show dha judgeboundary
  • show dha judgeproportion
  • show dha modelswitch
  • show disk slowthreshold
  • show disk_reliability_policy slow_disk_detect
  • show file_system check
  • show file_system dirtydata
  • show file_system min_fs
  • show file_system rescue
  • show file_system scrub
  • show file_system scrub_error_info
  • show fs_clone split
  • show fs_clone split_concurrent_num
  • show fs_clone split_concurrent_size
  • show fs_snap_control action
  • show fs_snap_control all_task_info
  • show fs_snap_control code
  • show fs_snap_control last_task_id
  • show fs_snap_control status
  • show fs_snap_control task
  • show fs_snapshot resource
  • show hypervault_backup general
  • show hypervault_event general
  • show hypervault_restore general
  • show nfs server_info
  • show performance ndmp
  • show pim stat
  • show protocol debug
  • show remote_replication cfg_switch
  • show space check_space_consistency
  • show space dmn_info
  • show space statistic_info
  • show statistic nfs_connection
  • show statistics ftp_connection
  • show statistics ftp_connection_count
  • show statistics_switch ftp
  • show system external_tlv_channel
  • sio show slowthresh
  • spa showqueueinfo
  • ss showtask
  • ssdc show bg
  • ssdc show copyspeed
  • ssdc show copystate
  • ssdc show mem
  • ssdc show objDelBlkDetail
  • ssdc show pt
  • ssdc show ssd
  • ssdc show st basic
  • ssdc show volCachedDataInfo
  • show logical_port failover_switch
  • delete fs_private_snapshot force
  • pair showcounter
  • change disk slowthreshold
  • change dha singlemodelconfig
  • change disk ak_auth_recover
  • change file_system switch
  • show file_system switch
  • change port enabled
  • show system configuration_log
  • remove system management_ip
  • remove system maintenance_ip
  • change ddp limit_time
  • os_change_bayconfig.sh
  • show service ndmp_connection
  • show statistic ndmp_connection
  • change file_system scrub
  • change space global_config
  • show space global_config
  • change cifs share_cache
  • clear cifs share_cache
  • ccdb.sh
  • change cache destage_concurrent
  • show ftp stat
  • show ndmp stat
  • sshtoremoteExt
  • change disk_domain verify_pool_meta
  • show disk_domain verify_pool_meta
  • overload_ctrl show flowctrl_info
  • Qos show io_class_detail
  • help
  • ssdc show obj
  • sys showlockhandle
  • change logical_port failback
  • show smartqos_policy switch
  • change smartqos_policy function_enabled
  • change smartqos_policy switch
  • show smartqos_policy delay
  • show ldap_server general
  • change ldap_server
  • show rsf upgrade_check_info
  • export file_system_tier_info
  • swap dr_star_member remote_replication
  • show nfs nfsv41_session_forechannel
  • change nfs nfsv41_session_forechannel
  • change disk_domain disk_log
  • show disk_domain disk_log
  • change lun_takeover enhance_switch
  • change upgrade port_failover_switch
  • add snapshot_group snapshot
  • remove snapshot_group snapshot
  • show takeover_switch global_enhanced_masquerading_switch
  • rst_svc_ctl.sh
  • change nas_log function_debug_info
  • show fs_snapshot clone_ref
  • show cifs smb1_stat
  • change tgt_switch vxvm_dmp_feature
  • memstat.sh
  • change hyper_metro_consistency_group general*
  • change hyper_metro_pair general*
  • show disk_group
  • change file_system rescue

Issue 03 (2018-05-09)

This is the third official release. The updates are as follows:

Added commands:

  • poweroffenclosure
  • perf.sh
  • changelogical_portfailover_switch
  • changelogical_portfailback
  • rst_svc_ctl.sh
  • changehyper_metro_vstore_pairfull_sync_cfg
  • changehyper_metro_pairfull_sync_cfg
  • changehyper_metromost_domain_enabled
  • showhyper_metromost_domain_enabled
  • removehyper_metro_consistency_groupmember
  • deletehyper_metro_domaindb
  • deletehyper_metro_pairdb
  • deletehyper_metro_pairdcl
  • deletehyper_metro_pairdump
  • deletehyper_metro_pairlog
  • deletehyper_metro_pairrsstype
  • showhyper_metro_consistency_groupconfig
  • clearhyper_metro_consistency_groupdb
  • deletehyper_metro_vstore_pairdb
  • deletehyper_metro_vstore_pairrss
  • changehyper_metro_consistency_grouplink_status
  • changehyper_metro_pairlink_status
  • changehyper_metro_vstore_pairlink_status
  • changehyper_metro_pairgeneral*
  • changehyper_metro_consistency_groupgeneral*
  • changelun_takeoverenhance_switch
  • showupgradeport_failover_switch
  • changeupgradeport_failover_switch
  • showhyper_metro_vstore_paircfg_switch
  • showhyper_metro_paircfg_switch
  • changehyper_metro_paircfg_switch
  • changehyper_metro_vstore_paircfg_switch
  • showhyper_metro_vstore_pairremaincfglog
  • xnetpalsetnapisch

Modified commands:

  • changedisk_domainverify_pool_meta
  • showdisk_domainverify_pool_meta
  • changelun_cacheforce_destage
  • changeomnilockopen
  • changeodxodx_enabled
  • cliget-dbbuinfo
  • cliget-dledinfo
  • changeverify_stripeconfig
  • cpyuserinfo
  • deletequorum_server_linkdb
  • dclcounter
  • eplshowerrorio
  • grainshowAllocAlg
  • restorehotpatch
  • changedisk_domainformat_parallel
  • changeftdslocation
  • Qosshowio_class_detail
  • showdlmresource_master
  • changesmartqos_policyfunction_enabled
  • deletequorum_serverdb
  • devlunshowverifystripeinfo
  • maint_debug_cli
  • showcacheglobal
  • spacetxshow
  • showcacheblocked_page
  • showpairlog_ctrl
  • volumeshowverifystripeinfo
  • volumeshowrescallstats
  • showsmartqos_policyswitch
  • showsystemforce_write_back
  • showsmartqos_policydelay
  • showsystemcommand_list
  • eplshowevent
  • eplshowldev
  • pairshowqueueinfo
  • eplshowdbarray
  • deletesnapshot_rsstype
  • deleteclone_db
  • deleteclone_dcl
  • deleteclone_rsstype
  • deletelun_migration_rsstype
  • deletelun_migration_dcl
  • deletelun_migration_db
  • changeiscsidiscover_multiport
  • showpairinit_accessor
  • help
  • xrbshowintermem
  • showdlmresource_proxy
  • changenfsnfsv3_readdir_buf
  • changenfsnfsv4_readdir_buf
  • showdisk_domainformat_mode
  • changedisk_domainformat_mode
  • scsishowreservationlun
  • changeccdbgeneral
  • cgroup_manage.sh
  • setupsystem
  • cmm.sh
  • ckgiofshowincon
  • ckgiofckgtrans
  • msshowdisk
  • kvdbcalcucrc
  • nmgrshowinst
  • spaextlist
  • spacrccheck
  • os_upgrade_hotpatch.sh
  • changesmartqos_policyswitch
  • changesystemmaintenance_ip
  • overload_ctrlshowflowctrl_info
  • changestorage_poolrepair_lun
  • changeremote_replicationclear_difference
  • rmshowmetaio
  • drvunfshowiniioprofile
  • changeverify_stripeenabled
  • changelogical_portfailover_switch
  • drvunfshowdetail
  • showsystem_diskupgrade_status
  • testlogical_portfailover
  • changefdsacheck_item_switch
  • grainshowAllocTree
  • spcshowstatistic
  • changelogical_portfailover
  • changelogical_portfailback
  • changenfsnfsv3_forward_switch
  • shownfsnfsv3_forward_switch
  • shownfsnfsv4_opened_files
  • devlunshowstepcount
  • createupgradesession
  • sysshowgpoollock
  • false
  • erase
  • hiddr_test
  • changehyper_metro_paircfg_switch
  • changehyper_metro_vstore_paircfg_switch
  • showddpchunk_info
  • showddpchunk_meta
  • showddpio_counter
  • showddpmem_info
  • showddpmeta_list
  • showddpratio
  • showhyper_metro_paircfg_switch
  • showhyper_metro_vstore_paircfg_switch
  • showhyper_metro_vstore_pairremaincfglog
  • arbshowall
  • arbshowtrace
  • cacheshowforcemirror
  • cacheshowprefetch
  • changecifskeep_alive_switch
  • changecifskeep_idle
  • changecifslog_level
  • changecifsreserve_bit
  • changecifsrtt_switch
  • changecifssmb3_switch
  • changecontrollerdma_type
  • changecpufrequency
  • changededup_lunscrub
  • changefile_systemamend
  • changefile_systemcheck
  • changefile_systemforce_expand
  • changefile_systemisolate_object
  • changefile_systemmin_fs
  • changefile_systemrepair
  • changefile_systemvstore
  • changefsaopen_lock
  • changefsastat_switch
  • changenas_logdebug_switch
  • changenas_memhealth_limit
  • changenfsnfsv3_readdirplus_support
  • changenfsnfsv4_idmap_support
  • changenfsrecv_buf
  • changenfsrtt_switch
  • changenfssend_buf
  • changenfsstat_switch
  • changeomnilockopen
  • changeomnilockrtt_switch
  • changepalasync_delete
  • changepalclear_trunc_xattr
  • changepalrtt
  • changeremote_replicationfull_sync_cfg
  • changeremote_replication_vstorefull_sync_cfg
  • changeremote_replication_vstorelink_status
  • changeservicendmp_delete_snapshot
  • changeshake_alarmgeneral
  • changespacecheck_space_consistency
  • changespaceconfig
  • changespacegrain
  • changespacegrain_extent_tree
  • changespacegrain_merge_tree
  • changespacerescue_config
  • changespaceflowgeneral
  • changespacetxtimer
  • changespcrtt_switch
  • changestatistics_switchftp
  • changestorage_poolrepair_dedup_lun
  • changesystemexternal_tlv_channel
  • clearcifsconnection
  • clearcifsfp_record
  • clearcifsserver_stat
  • clearcifssmb1_stat
  • clearcifssmb2_stat
  • clearfsaoperation_timeout
  • clearfsarequest_stat
  • clearnfsconnection
  • clearnfsnfsv3_lock
  • clearnfsnfsv3_lock_db
  • clearnfsnfsv3_nlm_stats
  • clearnfsnfsv3_stat
  • clearnfsnfsv4_dbuffer
  • clearnfsnfsv4_idmap_cache
  • clearnfsnfsv4_stat
  • clearnfsserver_stat
  • clearnfsshare_cache
  • clearomnilockbrl
  • clearomnilocklock_client_stat
  • clearomnilockopen
  • clearperformancendmp
  • clearpimstat
  • deletededup_lunscrub_error_info
  • deletefile_systemforce
  • deletefile_systemscrub_error_info
  • deletehypervaultdcl
  • deletehypervaultrss_type
  • deletehypervaultservice_db
  • deletehypervault_dbgeneral
  • deleteomnilockopen
  • deleteremote_replication_vstoredb
  • deleteremote_replication_vstorerss
  • deletespacegrain_extent_tree
  • disklogrepairio
  • disklogshowobj
  • drvsascbbgetroutelist
  • drvsascbbreadreg
  • epllinkq
  • eplversionservice
  • exportfile_systemdirtydata
  • mrshowblkmgr
  • mrshowckgmgr
  • mrshowfilestatus
  • mrshowflowcnt
  • mrshowloginfo
  • mrshowstatus
  • mrshowtreehandle
  • mrmshowcounter
  • mrrrepairextentcountshow
  • mrrshowflow
  • mrrshowrpoolaction
  • msshowscan
  • msshowtask
  • palctrlminloadinfo
  • repshowlastfailtrace
  • rephcquerypair
  • rephcshowAllCgLockInfo
  • rephcshowAllPairLockInfo
  • rephcshowCgLockInfo
  • rephcshowluntopair
  • rephcshowPairLockInfo
  • rephvlockshow
  • rephvlogzoneshow
  • rephvmutexshow
  • rephvnegoshow
  • rephvpolicyshow
  • rephvvaultshow
  • scsishowtpgstatus-llunID
  • showantivirusmempool
  • showantivirusscan
  • showcifsconnection
  • showcifsfp_record
  • showcifsreserve_bit
  • showcifsrtt_switch
  • showcifsserver_info
  • showcifsserver_stat
  • showcifssmb1_stat
  • showcifssmb2_stat
  • showcifssmb3_switch
  • showcontrollerdma_type
  • showdedup_lunscrub
  • showdedup_lunscrub_error_info
  • showdiskslowthreshold
  • showdisk_reliability_policyslow_disk_detect
  • showfile_systemcheck
  • showfile_systemdirtydata
  • showfile_systemisolate_object
  • showfile_systemmin_fs
  • showfile_systemoptimization
  • showfile_systemrepair
  • showfile_systemrescue
  • showfile_systemscrub
  • showfile_systemscrub_error_info
  • showfs_snap_controlstatus
  • showfsaopen_lock
  • showfsaoperation_timeout
  • showfsarequest_stat
  • showfsastat_switch
  • showhypervault_backupgeneral
  • showhypervault_eventgeneral
  • showhypervault_restoregeneral
  • shownas_logdebug_switch
  • shownas_memhealth_limit
  • shownfsconnection
  • shownfsnfsv3_err_stat
  • shownfsnfsv3_lock_db
  • shownfsnfsv3_nlm_stats
  • shownfsnfsv3_nlm_svc_info
  • shownfsnfsv3_readdirplus_support
  • shownfsnfsv3_stat
  • shownfsnfsv4_dbuffer
  • shownfsnfsv4_err_stat
  • shownfsnfsv4_idmap_support
  • shownfsnfsv4_stat
  • shownfsreaddir_buf
  • shownfsrtt_switch
  • shownfsserver_info
  • shownfsserver_stat
  • shownfsstat_switch
  • shownfswork_queue_info
  • showomnilockbrl
  • showomnilockbrl_lock_info
  • showomnilockfile
  • showomnilocklock_client_info
  • showomnilocklock_client_stat
  • showomnilocklock_server_info
  • showomnilocklock_server_stat
  • showomnilockopen
  • showomnilockopen_lock_wait_info
  • showomnilockrtt_switch
  • showpalasync_delete
  • showpalasync_delete_apo
  • showpalasync_delete_info
  • showpalattribute
  • showpalclear_trunc_xattr
  • showpalcontrol_flow
  • showpalcontrol_info
  • showpalcontrol_trace
  • showpalcounter
  • showpaldentry
  • showpaldentry_info
  • showpaldirectory
  • showpalevent_record
  • showpalextra_attribute
  • showpalextra_attribute_list
  • showpalfai
  • showpalfile_handle
  • showpalfile_system_event
  • showpalfile_system_perfomance
  • showpalfile_system_service_stat
  • showpalforward_info
  • showpallink_table
  • showpalmaster_node
  • showpalmemory
  • showpalnotify_entry
  • showpalnotify_memory
  • showpalpath
  • showpalrtt
  • showpalsnap_fai
  • showpaltruncate_info
  • showpalvaai_io_counter
  • showpalvaai_list
  • showpalvaai_property
  • showpalvaai_task
  • showpalvaai_task_info
  • showpalvnode_attribute
  • showpalworm_file_attribute
  • showperformancendmp
  • showpimstat
  • showprotocoldebug
  • showralcounter
  • showrdcldataset
  • showrelcounter
  • showrelmemory
  • showrelstatus
  • showreltask
  • showremote_replication_vstorecfg_switch
  • showremote_replication_vstoreconfiguration
  • showspaceabnormal_file_system_info
  • showspaceapo_entry_info
  • showspaceapo_info
  • showspacecheck_space_consistency
  • showspacedmn_info
  • showspaceflow_control
  • showspaceflow_io
  • showspacegrain
  • showspacegrain_alloc
  • showspacegrain_defree
  • showspacegrain_dynamic
  • showspacegrain_extent_count
  • showspacegrain_extent_queue
  • showspacegrain_extent_tree
  • showspacegrain_extent_tree_status
  • showspacegrain_io
  • showspaceobject_bonus
  • showspaceobject_config
  • showspaceobject_mem
  • showspaceobject_set_info
  • showspacesio
  • showspacestage_info
  • showspacestatistic_info
  • showspacetask_flow_info
  • showspacetransaction
  • showspaceuberblock
  • showstatisticnfs_connection
  • showstatisticsftp_connection
  • showstatisticsftp_connection_count
  • showstatistics_switchftp
  • sioshowslowthresh
  • spashowqueueinfo
  • space.sh
  • ssshowtask
  • ssdcshowobj
  • sysshowdblock
  • sysshowlockhandle
  • sysshowmem
  • sysshowzoneinfo
  • txmgr
  • volsshowcmdcnt
  • showlogical_portfailover_switch
  • changeremote_replication_vstorecfg_switch
  • shownfsnfsv3_forward_stat
  • clearnfsnfsv3_forward_stat
  • eamaddmgrethip
  • changediskslowthreshold
  • changedhasinglemodelconfig
  • changenfsage_time
  • shownfsage_time
  • changefile_systemswitch
  • showfile_systemswitch
  • changeportenabled
  • showad_processstatus
  • sys.sh
  • showservicendmp_connection
  • showstatisticndmp_connection
  • changefile_systemscrub
  • changefile_systemoptimization
  • changefile_systemrescue
  • changespaceglobal_config
  • showspaceglobal_config
  • changecifsshare_cache
  • clearcifsshare_cache
  • ccdb.sh
  • devlunshowctrl
  • showspace_taskgeneral
  • showhttpstat
  • showftpstat
  • showndmpstat
  • sshtoremoteExt
  • poweroffenclosure
  • rst_svc_ctl.sh
  • deletehyper_metro_pairdump
  • changehyper_metro_pairgeneral*
  • changehyper_metro_consistency_groupgeneral*
  • changelun_takeoverenhance_switch

Issue 02 (2018-01-30)

This is the second official release. The updates are as follows:

Added commands:

  • restore_sysenclosure_info.sh
  • show failover_path general
  • cache show iomode
  • dmi.sh
  • show lun cache_sequence_flow
  • change port enabled
  • show global_task_restrict switch
  • change global_task_restrict switch
  • change remote_device degrade_param
  • help*
  • change disk_domain lid_switch
  • eam framecode
  • eam getenclosureinfo
  • eam setframecascademode
  • show disk_domain lid_switch
  • eam setdefaultframecascademode
  • eam setoeminfo
  • upgrade_atom
  • os_upgrade_coldpatch.sh
  • clear cifs share_cache
  • change cifs share_cache
  • change ddp limit_time
  • change tgt_switch caw_feature
  • change tgt_switch loss_inq
  • show tgt_switch loss_inq
  • show tgt_switch caw_feature
  • alarm sendalarm
  • clear_user.sh
  • showbayconfig
  • tcpdump.sh
  • change hyper_metro most_domain_enabled
  • show hyper_metro most_domain_enabled
  • change vlan_offload state
  • scsi showaluainfo
  • tgt gethostidlist
  • tgt showses
  • show driver queuedepth
  • change driver queuedepth
  • pair showHoldReqlist
  • pair showpairio
  • pair showlogmgr
  • pair showloglist
  • bgr showoverload
  • ioctrl showhang
  • lmr show lunservice

Modified commands:

  • os_backup_info.sh
  • modifydbtableinfo.sh
  • show system configuration_log
  • xrb iom
  • xnet showctrlmsgnum
  • xnet showrpageinfo
  • logzonefreelogbylogid.sh
  • mp show path2lun
  • change disk_domain repair_pool_meta
  • cleardb
  • show kms statistics
  • show kms key
  • import kms key
  • show space global_config
  • change remote_device transport_optimize
  • change system force_write_back
  • remove system maintenance_ip
  • remove system management_ip
  • cache show obj
  • change disk factory_reset
  • change file_system optimization
  • change file_system rescue
  • change file_system scrub
  • change nfs age_time
  • delete root_cause_alarm rule
  • os_change_bayconfig.sh
  • show nfs age_time
  • show service ndmp_connection
  • show statistic ndmp_connection
  • show disk_bom blacklist
  • show disk_bom list_config
  • show disk_bom whitelist
  • delete vm_fs general
  • change cache seqflow
  • sys.sh
  • omm show_status
  • show failover_path general
  • change file_system switch
  • clear configuration_data
  • show file_system switch
  • change space global_config
  • ccdb.sh
  • show global_task_restrict switch
  • change global_task_restrict switch
  • change remote_device degrade_param
  • clear cifs share_cache
  • change cifs share_cache

Issue 01 (2017-11-30)

This is the first official release.

Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000181619

Views: 536428

Downloads: 221

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next