No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show third_party_policy provider

show third_party_policy provider

Function

The show third_party_policy provider command is used to query server information about third-party policies.

Format

show third_party_policy provider [ policy_name=? ]

Parameters

Parameter

Description

Value

policy_name=?

Policy name.

The value contains 1 to 31 characters including only letters (case insensitive), digits, and underscores (_).

Views

Developer view, vstore developer view

Usage Guidelines

None

Example

  • Query all server information under a vStore.
    developer:/>show third_party_policy provider 
    Policy ID Policy Name Port 
    -------- -------- --------- 
     1         test       123
  • Query server information about the policy named "test" under a vStore.
    developer:/>show third_party_policy provider policy_name=test 
    Policy ID: 1 
    Policy Name: test 
    Server IPs: 10.1.1.1 
    Port: 123

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Policy ID

Policy ID.

Policy Name

Policy name.

Server IPs

IP address list of a third-party server.

Port

Port number of a third-party server.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 640316

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next