No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication link_status_enabled

change remote_replication link_status_enabled

Function

The change remote_replication link_status_enabled command is used to change the status of the management link on local end remote replication to OK.

Format

change remote_replication link_status_enabled remote_replication_id=?

Parameters

Parameter

Description

Value

remote_replication_id=?

Remote replication ID

To obtain the value, run the show remote_replication general command without parameters.

Views

Developer view

Usage Guidelines

This command is used to change the status of the management link on local end remote replication to OK. You should run this command under the guidance of a maintenance engineer.

Example

To change the remote replication, which ID=0, management link status on the local end to OK.

developer:/>change remote_replication link_status_enabled remote_replication_id=0 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 588834

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next