No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
db showheader

db showheader


The db showheader command is used to view header information of the configuration database.


db showheader




Diagnostic view

Usage Guidelines



Show header information of the configuration database on the master controller.

admin:/diagnose>db showheader 
******************MASTER NODE TABLE Header INFO *********** 
Product name      = 5600 V5 
DB magic          = 0xdb123456  
DB version        = 0x1a00cd  
Byte order        = 0xfffe  
Data sn           = 0x33b  
Product sn        = 35890iuy6789jhyu7865  
Save disk id      = 0x3  
Save time         = 8 - 4 ,3 : 51 :45  
Crc               = 0x447f03f8  
DB total size     = 0x4d15000  
Data section size = 0x4ca3000  
************** TABLE Header End *********** 

System Response

The following table describes the parameter meanings.



Product name

Product name.

DB magic

Magic number of the configuration database.

DB version

Version of the configuration database.

Byte order

Byte order.

Data sn

Serial number of data flushing.

Product sn

Serial number of the product.

Save disk id

ID of the disk that saves data.

Save time

Time of saving data.


Check value of the configuration data.

DB total size

Total size of the configuration database.

Data section size

Size of the data segment.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 636583

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next