No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete pair db_index

delete pair db_index


The delete pair db_index command is used to forcibly delete the pair index DB information about replication.


delete pair db_index db_table_name=? option=? db_key=?






DB table name.

The value contains 1 to 31 ASCII characters including digits, letters, underscores (_), hyphens (-), and periods (.), can only start with a digit or a letter.


Operation type.

The value is "all" or "single", where:

  • "all": all records.
  • "single": single record.


DB key.

Export the CCDB and check the incorrect db_key.


Developer view

Usage Guidelines

Do not use this command without R&D engineers' guidance. This command can only be used when the replication with incorrect pair index DB information cannot be recovered. Do not use this command in other scenarios.


Delete the pair index DB whose table name is "DB_REP_UTIL_INDEX_COPY_SHARE" and key value is "0".

developer:/>delete pair db_index db_table_name=DB_REP_UTIL_INDEX_COPY_SHARE option=single db_key=0  
DANGER: You are about to forcibly maintain value-added features. This operation will cause the corresponding value-added pair to be unavailable. 
This operation enables you to forcibly modify or delete the configuration information about value-added features if value-added features are abnormal. 
Suggestion: Before performing this operation, contract R&D engineers, perform all procedures under their guidance, and confirm the operation. 
1. The system is not configured by other users. 
2. The parameter values that are entered are correct. 
Have you read danger alert message carefully?(y/n)y  
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 637550

Downloads: 256

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next