No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The help command is used to show the help information of all the commands that are available in serial port mode.






serial port mode

Usage Guidelines



View the help information of commands that are available in serial port mode.

Storage: _super_admin> help 
Supported commands in this mode: 
showsuperadmin                Show all the system super administrator names. 
initpasswd                    Initialize the password of a specified super administrator. If you are failed to execute this command, you may try initlocalpasswd instead. 
chgsuperpasswd                Change the password of _super_admin. 
chgibcpasswd                  Change the password of ibc_os_hs. 
ibcpasswd                     Initialize the password of ibc_os_hs. 
initibckey                    Initialize the public-key of ibc_os_hs. 
initlocalpasswd               Initialize the password of a specified super administrator on current node. This command should only be used when the system is not normal. Make sure that you have tried initpasswd firstly. 
exit                          Quit the serial port mode. 
help                          Show the allowed commands in this mode.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 633253

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next