No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvist showmgmt

drvist showmgmt

Function

The drvist showmgmt command is used to view statistics on the task management commands of the Internet Small Computer Systems Interface (iSCSI) target.

Format

drvist showmgmt

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View statistics on the task management commands of the iSCSI target.

admin:/diagnose>drvist showmgmt 
Show iscsi management cmd statistic 
--------------------------------------- 
Cmd type           Begin Good rsp Bad rsp 
Invalid            0     0        0 
Abort task         0     0        0 
Abort task set     0     0        0 
Clean aca          0     0        0 
Clean task set     0     0        0 
Logical unit reset 0   0        0 
Target warm reset  0     0        0 
Target cold reset  0     0        0 
Task reassign      0     0        0

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Invalid

Statistics on invalid commands.

Abort task

Statistics on abort commands.

Abort task set

Statistics on abort task set commands.

Clean aca

Statistics on clean aca commands.

Clean task set

Statistics on clean task set commands.

Logical unit reset

Statistics on LUN reset commands.

Target warm reset

Statistics on warm reset commands.

Target cold reset

Statistics on cold reset commands.

Task reassign

Statistics on task reassign commands.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 579565

Downloads: 229

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next