No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvsascbb showdevinfo

drvsascbb showdevinfo


The drvsascbb showdevinfo command is used query networking of back-end devices for a specified slot card.


drvsascbb showdevinfo card_id=?






Slot ID of the SAS interface card.

The value is an integer ranging from "0" to "11".


Diagnostic view

Usage Guidelines



Query networking of back-end devices for a specified slot card.

admin:/diagnose>drvsascbb showdevinfo card_id=8 
  Logic Portid(Portid)        Dev Addr         [host:bus:scsi:lun] slot ST        Exp Addr        Dev Type  
  ------------------- ------------------     ------------------- ---- -- ------------------ ---------  
  0x1f8801(0)            0x522223333444453b         [10:0: -1:0]       24 4 0x50022a1060708080 3(EXP) 
  0x1f8800(1)            0x522223333444443b         [10:0: -1:0]       25 4 0x50022a1060708081 3(EXP) 
  0x1f8800(1)            0x500111111111103f         [10:0: -1:0]        8 4 0x522223333444443b 3(EXP) 
  0x1f8801(0)            0x522223333444453e         [10:0:  0:0]       48 4 0x522223333444453b 1(SES) 
  0x1f8800(1)            0x522223333444443e         [10:0:  1:0]       48 4 0x522223333444443b 1(SES) 
  0x1f8800(1)            0x5000c50048317652         [10:0:200:0]        0 4 0x500111111111103f 1(SAS)

System Response

The following table describes the parameter meanings.



Logic Portid(Portid)

ID of a logical port (port ID allocated by the chip).

Dev Addr

Device SAS address.


[SAS initiator ID:reserved:ID of the target connected to the initiator:reserved].


Slot ID of the parent device that a device connects to.


Device status.

Exp Addr

SAS address of the parent device.

Dev Type

Device type.

Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 633806

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next