No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eam showfailoverpath

eam showfailoverpath

Function

The eam showfailoverpath command is used to query the path information about EAM port failover.

Format

eam showfailoverpath

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

Query the path information about EAM port failover.

admin:/diagnose>eam showfailoverpath 
 Source Port sourcePortId     Target Port targetPortId  available SPNpiv SSNpiv TPNpiv TSNpiv     srcPortLink  targetFreeLink  freeLinkEnough redundancy  FailoverStatus  
     CTE0.A3.P0           20300      CTE0.B3.P0 1000001020300        1      2      2      2      2              -1              -1               2            1               0  
admin:/diagnose>

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Source Port

Source port name.

sourcePortId

Source port ID.

Target Port

Target port name.

targetPortId

Target port ID.

available

Whether the failover path is available.

SPNpiv

Whether the source port supports N_Port ID Virtualization (NPIV).

SSNpiv

Whether the switch connected to the source port supports NPIV.

TPNpiv

Whether the target port supports NPIV.

TSNpiv

Whether the switch connected to the target port supports NPIV.

srcPortLink

Number of links on the source port.

targetFreeLink

Number of available links on the target port.

freeLinkEnough

Whether the number of available links on the target port is sufficient.

redundancy

Whether the links of the target port meet the redundancy requirement.

FailoverStatus

Failover status of the source port.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 589852

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next