No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The chgsuperpasswd command is used to change the password of user _super_admin.






serial port mode

Usage Guidelines

  • After the password of user _super_admin is changed, a version rollback may cause a storage system startup failure.
  • This command is only available in serial port mode.
  • This command requires you enter the old and new passwords of user _super_admin. The new password must:
    • Contain 8 to 16 characters.
    • Contain any two of the following characters: one lowercase letter, one uppercase letter, one digit, and one special character (`~!@#$%^&*()-_=+|[{}];:',<.>/?).
    • Cannot contain backslashes (\), double quotation marks ("), and spaces.
    • Be different from the user name or the user name in a reversed order.
  • After changing the password of user _super_admin, you must remember the new password. If not, you cannot perform any operations that require this user right. To retrieve the new password, you need to return the storage device to the factory for handling.


Change the password of user _super_admin.

Storage: _super_admin> chgsuperpasswd 
*****Please enter old password for _super_admin:***** 
*****Please enter new password for _super_admin :***** 
*****Please re-enter new password for _super_admin :***** 
Change _super_admin's passwd successful

System Response


Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 633813

Downloads: 253

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next