No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 5000, 5000F, 6000, and 6000F V5 Series V500R007

This document is applicable to OceanStor 5110 V5, 5110F V5, 5300 V5, 5500 V5, 5600 V5, 5800 V5, 6800 V5, 5300F V5, 5500F V5, 5600F V5, 5800F V5, and 6800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
snap showcapacity

snap showcapacity

Function

The snap showcapacity command is used to view snapshot specifications.

Format

snap showcapacity

Parameters

None

Views

Diagnostic view

Usage Guidelines

None

Example

View snapshot specifications.

admin:/diagnose>snap showcapacity 
Max Source LUNs For Snapshots : XXXX 
Max Snapshots Per Source LUN : XXXX 
Max Snapshots In System : XXXX 
Max LUNs In System : XXXX 
Max Snapshots For Consistent Activating : XXXX 
Max Restore Snapshots At The Same Time : XXXX 
Max Snapshot Groups In System : XXXX 
Max Snapshots Per Snapshot Group : XXXX 
Max Snapshot Groups Per Snapshot : XXXX

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Max Source LUNs For Snapshots

Maximum number of source LUNs supported by snapshots.

Max Snapshots Per Source LUN

Maximum number of snapshot LUNs that can be created for source LUNs.

Max Snapshots In System

Maximum number of snapshots supported by the system.

Max LUNs In System

Maximum number of LUNs supported by the system.

Max Restore Snapshots At The Same Time

Maximum number of snapshots that can be restored concurrently.

Max Snapshots For Consistent Activating

Maximum number of snapshot LUNs that can be activated without affecting data consistency.

Max Snapshot Groups In System

Maximum number of snapshots supported by the system.

Max Snapshot Groups Per Snapshot

Maximum number of snapshot groups supported by a snapshot.

Max Snapshots Per Snapshot Group

Maximum number of snapshot LUNs supported by a snapshot group.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181619

Views: 584821

Downloads: 233

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next